Final Drive Type GG - Installation Instructions

A – B PORTS:

Located in the center of the flange these are the inlet and outlet ports. These will be the two larger diameter hoses. Use the supplied adapters and complete hose connections.

C1 – C2 Ports:

The drain ports are located to the right and left of the A/B ports. The position of the drain port can be changed by placing a plug in either C1 or C2. It’s important to always attach the case drain hose to the uppermost port so any air can escape the case and leave the bottom port plugged. Use supplied adapter and complete hose connection.

D Port:

The two speed port is centered above the A/B ports. Use supplied adapter and complete hose connection.